Reset a Shelly Device – The unofficial Shelly guide! (2024)

Factory reset device by the physical reset button :
Press and hold for 10 seconds to factory reset the Device.

Reset network settings by the physical reset button :
Press and hold for 5 seconds to reset device network settings and enable its access point.

Reset Network settings by power cycles: (only if “it’s enabled in settings)
Doing 5 quick succesive power cycles. to reset device network settings and enable its access point.
A succesive power cycles is done by flipping the main breaker 10 times with 2 second pause after each flip.

Factory reset device by the switch: (only if “Enable factory reset from input” is enabled in settings)
1 minute after the device is powered on, You can factory reset by flipping the switch 10 times.

Factory reset device by the Shelly Smart Control app
or http://control.shelly.cloud :
Go to the devices settings (cog wheel) – click on Factory reset and choose “Factory reset”

Factory reset device from its build in webinterface:
Enter the device web interface by typing its ip adresse in a browser.
Go to Settings and click on “Reset” next to “Factory reset device”

Factory reset device by the physical reset button :
Press and hold for 10 seconds to factory reset the Device.

Factory reset device by the physical reset button :
Press and hold for 10 seconds to factory reset the Device.

Reset network settings by the physical reset button :
Press and hold for 5 seconds to reset device network settings and enable its access point.

Reset Network settings by power cycles: (only if “it’s enabled in settings)
Doing 5 quick succesive power cycles. to reset device network settings and enable its access point.
A succesive power cycles is done by flipping the main breaker 10 times with 2 second pause after each flip.

Factory reset device by the switch: (only if “Enable factory reset from input” is enabled in settings)
1 minute after the device is powered on, You can factory reset by flipping the switch 10 times.

Factory reset device by the Shelly Smart Control app
or http://control.shelly.cloud :
Go to the devices settings (cog wheel) – click on Factory reset and choose “Factory reset”

Factory reset device by the physical reset button :
Press and hold for 10 seconds to factory reset the Device.

Enable Access point and Bluetooth connection by the physical reset button :
Press and hold for 5 seconds to enable Device access point and Bluetooth connection.

Factory reset device by the switch: (only if “Enable factory reset from input” is enabled in settings)
1 minute after the device is powered on, You can factory reset by flipping the switch 10 times. (Power between L and SW)

Factory reset device by the Shelly Smart Control app
or http://control.shelly.cloud :
Go to the device settings (cog wheel) – click on Factory reset and choose “Factory reset”

Factory reset device from its build in webinterface:
Enter the device web interface by typing its ip adresse in a browser.
Go to Settings and click on “Reset” next to “Factory reset device”

Factory reset device by the physical reset button :
Press and hold for 10 seconds to factory reset the Device.

Enable Access point and Bluetooth connection by the physical reset button :
Press and hold for 5 seconds to enable Device access point and Bluetooth connection.

Factory reset device by the switch: (only if “Enable factory reset from input” is enabled in settings)
1 minute after the device is powered on, You can factory reset by flipping the switch 10 times. (Power between L and SW)

Factory reset device by the Shelly Smart Control app
or http://control.shelly.cloud :
Go to the device settings (cog wheel) – click on Factory reset and choose “Factory reset”

Factory reset device from its build in webinterface:
Enter the device web interface by typing its ip adresse in a browser.
Go to Settings and click on “Reset” next to “Factory reset device”

Factory reset device by the physical reset button :
Press and hold for 10 seconds to factory reset the Device.

Enable Access point and Bluetooth connection by the physical reset button :
Press and hold for 5 seconds to enable Device access point and Bluetooth connection.

Factory reset device by the switch: (only if “Enable factory reset from input” is enabled in settings)
1 minute after the device is powered on, You can factory reset by flipping the switch 10 times. (Power between L and SW)

Factory reset device by the Shelly Smart Control app
or http://control.shelly.cloud :
Go to the device settings (cog wheel) – click on Factory reset and choose “Factory reset”

Factory reset device from its build in webinterface:
Enter the device web interface by typing its ip adresse in a browser.
Go to Settings and click on “Reset” next to “Factory reset device”

Factory reset device by the physical reset button :
Press and hold for 10 seconds to factory reset the Device.

Enable Access point and Bluetooth connection by the physical reset button :
Press and hold for 5 seconds to enable Device access point and Bluetooth connection.

Factory reset device by the switch: (only if “Enable factory reset from input” is enabled in settings)
1 minute after the device is powered on, You can factory reset by flipping the switch 10 times. (Power between L and SW)

Factory reset device by the Shelly Smart Control app
or http://control.shelly.cloud :
Go to the device settings (cog wheel) – click on Factory reset and choose “Factory reset”

Factory reset device from its build in webinterface:
Enter the device web interface by typing its ip adresse in a browser.
Go to Settings and click on “Reset” next to “Factory reset device”

Factory reset device by the physical reset button :
Press and hold for 10 seconds to factory reset the Device.

Enable Access point and Bluetooth connection by the physical reset button :
Press and hold for 5 seconds to enable Device access point and Bluetooth connection.

Factory reset device by the switch: (only if “Enable factory reset from input” is enabled in settings)
1 minute after the device is powered on, You can factory reset by flipping the switch 10 times. (Power between L and SW)

Factory reset device by the Shelly Smart Control app
or http://control.shelly.cloud :
Go to the device settings (cog wheel) – click on Factory reset and choose “Factory reset”

Factory reset device from its build in webinterface:
Enter the device web interface by typing its ip adresse in a browser.
Go to Settings and click on “Reset” next to “Factory reset device”